manualshive.com logo in svg

Epson ActionPC 1500, Reference Manual, Page: 256 / 272

Share
Download
Epson ActionPC 1500 Reference Manual Download Page 256

memory

The part of the printer’s electronic system that is used to store

information. Some information is fixed and is used to control

how the printer operates. Information that is sent to the printer

from the computer (such as download fonts and graphics) is

stored temporarily until it is printed out. See also RAM, and

ROM.

nonvolatile memory

The portion of the printer’s memory that is not lost when you

turn off the printer.

off line

When the printer is off line, it cannot communicate with the

computer.

on line

When the printer is on line, it can communicate with the

computer.

orientation

Refers to the direction in which characters are printed on a

page. This direction is either portrait with the text printed

across the width of the page, or landscape with the text printed

across the length of the page.

outline font

See scalable font.

parallel interface

See interface.

GL-6 Glossary

Summary of Contents for ActionPC 1500

















































































































































































































































































Reviews:

No comments