Epson ActionPC 1500, Reference Manual, Page: 170 / 272

Signal Return Signal Direction Description
Pin
Pin
10 28 ACKNLG OUT About a 10-microsecond
pulse. LOW indicates data
has been received and
that the printer is ready to
accept more data.
11
29 BUSY OUT A HIGH signal indicates
that the printer cannot
receive data. The signal
goes HIGH in the following
cases:
During data entry
(for each character)
During printing
During off-line state
During printer-error state
12
30 PE OUT
A HIGH signal indicates
that the printer is out of
paper.
13 - SLCT OUT Pulled up to +5V through
3.3 K ohm resistance.
14 - AUTOFEED IN During the LOW state, the
paper is automatically
fed one line after printing.
(The signal level can be
fixed using SelecType.)
15 -
16 -
17 -
NC
-
GND -
CHASSIS -
GND
Not used.
Logic ground level.
Printer’s chassis ground,
which is isolated from the
logic ground.
18 -
NC
-
19-30 - GND -
Not used.
Twisted-pair return signal
ground level.
A-10 Technical Specifications