47
ENERGY STAR Compliance
As an ENERGY STAR Partner, EPSON has determined
that this product meets the ENERGY STAR guidelines for
energy efficiency. The EPA ENERGY STAR office
equipment program is a voluntary partnership with the
computer and office equipment industry to promote the
introduction of energy-efficient personal computers,
monitors, printers, fax machines, and copiers in an effort to
reduce air pollution caused by power generation.
Important Safety Instructions
Before using your printer, read the following safety instructions to make sure you use the
printer safely and effectively:
■
Be sure to follow all warnings and instructions marked on the printer.
■
Do not place the printer on an unstable surface or near a radiator or heating vent or in
direct sunlight. Use only the type of power source indicated on the printer’s label.
■
Connect all equipment to properly grounded power outlets. Avoid using outlets on the
same circuit as photocopiers or air control systems that regularly switch on and off. Place
the printer near a wall outlet where the plug can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.
■
Do not let the power cord become damaged or frayed. If you use an extension cord with
the printer, make sure the total ampere rating of the devices plugged into the extension
cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of
all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.
■
Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not
spill liquid on the printer.
Always turn the printer off using the
P
power button. Don’t switch
off the power strip or unplug the printer until the
P
power light is off.
■
Do not block or cover the openings in the printer’s case or insert objects through the
slots. Except as specifically explained in this manual, do not attempt to service the printer
yourself.
Start.book Page 47 Tuesday, October 3, 2000 5:14 PM
