Epson 7900p - PowerLite XGA LCD Projector, User Manual

Page: 79 / 146

Fine-tuning the Projector
79
7. When you see this screen, select a zoom rate (display size), and
then press
Enter
.
8. When you see the message
Save image as user’s logo?
, select
Yes
and press
Enter
. Saving the logo takes about 15 seconds. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
Completed
, press
Esc
.
Choosing When to Display the Image
After your image is saved, you can set it up as the startup screen, or the
screen you see when there’s no signal or when your press the
A/V
Mute
button.
1. Press the
Menu
button to display the menus screen (if not already
displayed).
2. To display your image as the startup screen, select the
Advanced1
menu.
3. Select
Startup Screen
, highlight
ON
, and press
Enter
.
4. Select the
Setting
menu.
Set the zoom rate.
Zoom rate:
100% 200% 300%
User's Logo
note
If the
User’s Logo Protect
option has been set to
ON
,
the
No-Signal Msg.
and
A/V Mute
settings cannot be
changed. You need to turn
the protect function off first.
See page 81 for details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).