C
Specifications
C-9
R4C4590
Rev. D
A5 size
SPEC.FM
3/30/01
Pass 1
R
Proof Sign-off:
Takahashi, Kono
_______
Takahashi
_______
Hoadley, Courtier _______
Continuous paper (standard and multipart): rear entr
y
Note:
❏
The ratio of the cut/uncut length at the perforation should be
between 3:1 and 5:1.
❏
The thickness of the perforation part when extended should be 2 mm
or less.
❏
The perforation between pages should not extend all the way to the
edges of the paper. Uncut length on the edges should be 1 mm or
more.
❏
When the horizontal and vertical perforation cuts crossing, do not
print in between 3 mm above and below the horizontal perforation
and in between 28 mm left and right the vertical perforation.
Width
101.6 to 304.8 mm (4 to 12 inches)
Length (one page)
76.2 to 558.8 mm (3 to 22 inches)
Copies
1 or up to 5 copies
Thickness
Printable area 0.065 to 0.46 mm
(0.0025 to 0.018 inch)
Gathering area up to 0.9 mm
(0.035 inch)
Weight
(not multipart)
52 to 128 g/m² (14 to 34 lb)
Weight
(one sheet of multipart)
40 to 58 g/m² (10 to 15 lb)
Binding
Point glue or/and paper staples on
both sides
