4. Move the center support to a point midway between the edge
guides. Then gently extend the rear edge guide until it stops.
5. Fan a stack of paper; then tap it on a flat surface to even the
edges.
6. Load the stack of paper, printable side down, all the way into
the sheet feeder. Make sure the right edge of the stack is
against the right edge guide. Next, slide the left edge guide
against the left edge of the paper.
Note:
The sheet feeder can hold up to 100 sheets of 17-lb or 64g/m
2
plain
paper. Do not load paper above the arrow mark, which is located
on the inside surface of the edge guide.
E104
E105
L
Loire2
Rev.c
A5 size
Chapter 5
96/11/11
pass 0
5-4
Starting to Print with Macintosh
Summary of Contents for 1520 - Stylus Color Inkjet Printer
