8. Make sure the
Use Print Manager for this port
option is on;
it is on if the box contains a check mark. Then click
OK
.
Now you can use your printer on a network.
For Windows 3.1
Follow these steps to install the software using Windows 3.1:
1. Make sure Windows 3.1 is running and the Program
Manager window is open.
2. Insert the Printer Software CD shipped with your printer in
the CD-ROM drive. (If you use the floppy disk version,
insert it in a floppy disk drive.)
3. In the File menu, select
Run
. You see the Run dialog box. In
the Command Line box, type
D:\SETUP
. If the CD-ROM
drive you are using is not drive D, substitute the correct
letter. If you are installing from floppy disks, type
A:\SETUP
(or
B:\SETUP
).
Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, type
EPSETUP
instead of
SETUP
. In
the dialog box that appears, click the
Driver disk creation
utility
button and follow the on-screen instructions.
3101l2
2
R
Loire2 Ref. Guide
Rev.c
A5 size
Chapter 2
11-11-96
DR, pass 0
Getting Started
2-19
Summary of Contents for 1520 - Stylus Color Inkjet Printer
