Epsolar SPP-01, User Manual, Page: 12 / 25

10
Double click to select device (the configuration content will be changed
automatically).
4.
Configure relevant parameters by clicking “ Control P arameters”,
“General Load”, “LED Load” in the frame of P arameter Configuration
and “Time Sync” in the Management. After configuring parameters,
click “ OK” to quit and return to main interface (For the parameters
without configuration, uncheck the box “ ”).
5.
After configuration, click button to load configuration
into SPP-01 device (a corresponding dialog box will be popped up to
prompt whether loaded successfully or not).
Reading parameter data
If the configuration has been loaded to the SPP-0, click
button to upload the configuration in SPP -01 to P C, and refresh the
corresponding parameter configuration in “Parameter configuration”
frame, such as Control P arameter, General Load or LED Load, Time
Sync so as to view and modify the parameters.
Data clearing
If it is required to clear configuration in SPP -01, click
button directly.
Importing and ex porting parameter configuration
If it is required to backup parameter configuration, click