Epsolar eTracer ET4415BND, Operation Manual

Page: 5 / 44

1
1 Important Safety Information
This manual contains important safety, installation and operating instructions for the
eTracer-BND Series MPPT solar controller. Save these instructions.
The following symbols are used throughout this manual to indicate potentially
dangerous conditions or mark important safety instructions.
WARNING: Indicates a potentially dangerous condition. Use
extreme caution when performing this task.
CAUTION: Indicates a critical procedure for safe and proper
operation of the controller.
NOTE: Indicates a procedure or function that is important for
safe and proper operation of the controller.
General Safety Information

Read all of the instructions and cautions in the manual before installation.

There are no user serviceable parts inside the controller. Do not disassemble or
attempt to repair the controller.

Mount the controller indoors. Prevent exposure to the elements and do not allow
water to enter the controller.

Install eTracer-BND controller in well ventilated places, the heat sink of controller
may become very hot during operation.

Install external fuses/breakers as required.

Disconnect the solar module and fuse/breakers near to battery before installing or
adjusting the controller.

Power connections must remain tight to avoid excessive heating from a loose
connection.