Epsolar eTracer ET4415BND, Operation Manual

Page: 24 / 44

20
Press OK to enter the monitoring interface when the inverse cursor point to monitor
item. Press ESC button to exit. Work Log and Event Log could be browsed in this
interface, the operation is as follows:
Press OK to enter the Work Log or Event Log interface respectively when the item is
chosen in inverse. Press OK again to enter the Edit Mode. Use ↑ or ↓ button to
move the cursor between the time parameters and data bit. Use + - button to
modify the value and set the period of log for browse. When the period is set, press OK
to enter the corresponding details.
Log Number, time, the voltage and current of battery are included in every work log
item and are shown in the Work Log interface.
warning event sequence number, warning event, start or end time, the fault status and
values are all included in every event log item and are shown in the Event Log
interface.

Clock Set
The interface of Clock Set is shown as follow:
Press OK to enter the Clock Set interface when the inverse cursor
point to Clock Set item. Press ESC button to exit.
Date and Time can be adjusted in this interface. Press OK and
input the 6 digit user password and then Date and Time could be
adjusted. The format of date is YYYY-MM-DD; the one of time is HH-MM-SS. When
the set is over, press OK to save or press ESC button to cancel. ―Save success!‖ will
be promoted if adjusted and save operated successfully.
<1>Work Log
<2>Alarm Log
Alarm Log Query
From 2012-01-01
To 2012-06-08
Total
：
10
No. 1/10
Batt OVD/Begin
2012-01-04 14:20
Para 17.20V
Clock Set
Jan-16-2012
17:12:28
Input Password
000000
Save success! Save Cancel