![EPS EPS/HC 40030-60 Operating Manual Download Page 4](http://html.mh-extra.com/html/eps/eps-hc-40030-60/eps-hc-40030-60_operating-manual_2418432004.webp)
FMK0008970_4083-ESK_30V60A_1~230VAC_PFC_Ah_Ext-Sollwerte_X4_neutral_e.doc
5/41
1
General security information
1.1
Class-A device
This device is defined as a
class-A
-device.
Warning:
This device is provided to be used only in industrial
environment! In other environments, a sufficient
electromagnetic tolerance could not be assured without additional
installation measures.
1.2
Security
This DC power supply was delivered after a thorough function- and
safety-check. Only qualified staff shall connect the rectifier module and
put it into operation. Service and maintenance is only to be performed by
qualified personnel.
Any manipulation or repairing is life endangering. Observe all instructions
of the manufacturer; else, the warranty for DC power supplies and
accessories will expire.
Parts carrying a life-endangering voltage potential are installed inside the
casing. These are marked with a warning sticker.
Any manipulation of the electrical parts is life endangering and by doing
so, including improper operation, cancels the guarantee.
Attention!
Do not operate any DC power supply with one or more loose cable
connectors!
If during operation one or more plugs are pulled out of the boards
inside the modules, electronic parts and the power unit could be
destroyed!
This DC power supply was constructed in consideration of the threat
analysis and the relevant safety regulations. Further, all relevant
technical specifications are respected. Therefore, this technology is
state-of-the-art and guarantees a maximum of safety and functionality.
The safety and functionality can only be kept if the all relevant
arrangements are done.
The operator of the installation is responsible for the adherence of safety
rules.