EPS Clack CI Cabinet, Installation Manual

Page: 4 / 4

Naas, Co. Kildare
045 843614
info@epswater.ie www.epswater.ie
Dealer Information
Assembled by: Date:
Installed by: Date:
Mallow, Co. Cork
022 31200
Ballyhaunis, Co. Mayo
094 9633500
Mountrath, Co. Laois
057 8732279
Softener Specification 8 x 13 8 x 17 8 x 24 10 x 35
Total Height 523mm 625mm 800mm 1095mm
Total Depth 440mm 440mm 440mm 500mm
Width
240mm 240mm 240mm 320mm
Maximum working pressure
5 bar 5 bar 5 bar 5 bar
Minimum working pressure
1.7 bar 1.7 bar 1.7 bar 1.7 bar
Service flow rate 10 ltr/min 10 ltr/min 15 ltr/min 23 ltr/min
Pressure drop at service flow 0.2 bar 0.2 bar 0.35 bar 0.55 bar
Resin Volume 5 litres 8 litres 20 litres 30 litres
Minimum supply flow rate 5 ltr/min 8 ltr/min 8 ltr/min 8 ltr/min
Salt use per regeneration 0.75 kgs 1.2 kgs 3.0 kgs 4.5 kgs
Inlet / Outlet / Drain connections
¾
” BSPM
¾
” BSPM
¾
” BSPM
¾
” BSPM
Overflow connections
⅜
” hose sigot
⅜
” hose sigot
⅜
” hose sigot
⅜
” hose sigot
Softening capacity @ 300ppm 830 litres 1330 litres 2500 litres 5000 litres
Note:
It is not recommended to install any water softener in an attic.
Specification