39
Chapter 4: Meter Memory, Setup
Memory, Storing Test Results
Your meter stores a maximum of 480 test results with the time and date of the test. You can review them at
any time. When the memory is full, the oldest result is dropped as the newest is added, so it is very important
to have the correct time and date set in the meter.
Meter Setup - Using The Set Mode
By using the set mode, you can personalize your meter to suit your needs. Here are the features you can
customize —
Time and Date — to set the time and date (see Chapter 1).
Language — to set the language (see Chapter 1).
Volume – to set the volume (see Chapter 1)
Note:
1. Do not change your therapy based on one individual result in memory.
2. The memory is not lost when you replace the battery. You do need to check that the time
and date are still correct for future readings. See Section "Setting the time and date" in
Chapter 1.
3. Once 480 results are in memory, adding a new result causes the oldest one to be deleted.
4. If you don’t set “CS” mode, control solution values will be included in the memory and
averages. Setting the meter in control solution mode will prevent the control solution
reading from being added to your memory and averages.
