29
Chapter 4: Meter Memory, Setup
Memory, Storing Test Results
Your meter stores a maximum of 480 test results with the time and date of the test. You can review them at any
time. When the memory is full, the oldest result is dropped as the newest is added, so it is very important to
have the correct time and date set in the meter.
The memory function is necessary in order to transmit data to a central location (separate software &
instructions are available).
Note:
1. Do not change your therapy based on one individual result in memory.
2. The memory is not lost when you replace the battery. You do need to check that the time and
date are still correct. See Section "
Setting the Time and Date
" in Chapter 1.
3. Once 480 results are in memory, adding a new result causes the oldest one to be deleted.
4. In the Control Solution mode,
control solution
values will NOT be included in the average
memory.
