ePropulsion VAQUITA User Manual Download Page 16 | Manualshive

Page: 16 / 46

background image

14

FCC Statement

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The manufacturer is not responsible for any radio or TV interference caused

by unauthorized modifications to this equipment. Such modifications could

void the user's authority to operate the equipment.

Signature:

Shizheng Tao, Chief Executive Officer & Cofounder of

Dongguan ePropulsion Intelligence Technology Limited

«
...
14
15
16
17
18
...
»

Summary of Contents for VAQUITA















































Reviews:

No comments

Related manuals for VAQUITA

FIFTY-FIVE - REV1 11-2007

Brand: NOVAK Pages: 2

Brand: SOMFY Pages: 7

Brand: HAIMA Pages: 10

Brand: Perkins Pages: 108

Brand: Parker Pages: 71

Brand: Kubota Pages: 47

Brand: Kubota Pages: 181

Brand: dunkermotoren Pages: 30

Brand: RADEMACHER Pages: 72

Brand: NSK Pages: 33

Brand: Robin America Pages: 88

Brand: Yanmar Pages: 168

Brand: Electro motive Pages: 287

Brand: DETROIT Pages: 116

Brand: Uebelhoer Bros Pages: 12

Allen-Bradley TLP-SSN-F046

Brand: Rockwell Automation Pages: 8

Brand: Black Bruin Pages: 44

PS01-48x240F-EX-E

Brand: LinMot Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands