manualshive.com logo in svg

ePropulsion SPIRIT 1.0 Evo, User Manual

Share
Download
ePropulsion SPIRIT 1.0 Evo User Manual Download Page 43

41

Code

Cause

Solution

E12

The temperature of circuit 
board is too high.

Stop operating the outboard and wait until 
the temperature falls within the normal 
operating temperature range.

E22

MCU Communication Ab-
normality

Please restart to see if the error disappears, 
if not, please contact your dear for help.

E30

Throttle position sensor 
failure, should recalibrate 
the throttle position sen-
sor. 

Please refer to section 

6.3.2 Recalibration

 

to 

recalibrate the throttle position sensor.

E56

Communication Error bet-
ween outboard and battery

Check if the communication cable between 
outboard and battery is well connected, if 
yes, please restart the system.

E60

The remote control is run-
ning out of power. 

Please connect the remote control to the 
pod by a communication cable. Please refer 
to section 

6.2.2 Charged by Wired Connecti-

on

.

All cha-

racters  
display

The motor has no power.

Connect the battery to the outboard and 
then turn on the main switch.

Not paired

Please refer to section 

6.6 

Pairing Control 

System with the Outboard.

If the problem persists, please consult your ePropulsion authorized dealer for 
assistance.

Summary of Contents for SPIRIT 1.0 Evo

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands