17
2.5 Port or Starboard Side Setting
Make sure the handle side setting is done correctly before use. The Side
Mount Control is in starboard (right) side mode by default. If you need to
switch between the port (left) or starboard (right) side, please refer to the
following process for setting.
The option with a " " pattern on the right is the option in use.
Handle Side Setting Process
LCD Displaying
Step1:
In power-on state, press the
" " button and hold for 3s to enter the
preference setting page.
PowerLimit
UnitSetting
BatterySetting
Throttle
Version
Step2:
Press the "
^
" button to switch to
"Throttle".
PowerLimit
UnitSetting
BatterySetting
Throttle
Version
Step3:
Press the "
" button to enter
throttle setting page.
HandleSide
Calibration
Step4:
Press the "
" button to enter
"HandleSide" Setting page and set the port
(left) or starboard (right) side control mode
through the "
^
" button. Then press the "
" button to save the settings.
LeftSide
RightSide
Step5:
Press the " " button to return to
the throttle setting page.
HandleSide
Calibration
Summary of Contents for Side Mount Control
Page 2: ......
Page 20: ...18 Figure 2 12 Starboard right Side Figure 2 13 Port left Side Throttle Throttle ...
Page 47: ......
