29
5.3.2 Power Adjusting for Tiller
The Tiller is mainly used for power adjusting and steering control. When
the battery is well connected and switched on, power on the Tiller
to start the outboard, then turn the throttle gradually form zero position to the
forward direction to start. Please refer to Figure 5-8. Change the heading
direction by turning the Tiller on horizontal level. The maximum forward/
backward power is 3KW.
Forward
Backward
Neutral
Figure 5-8
Before power on the Tiller, please reset the throttle to neutral position.
If you find a blinking “
RESET” on the display panel, you are reminded to
reset the throttle to neutral position.
If you turn the throttle from the forward position to the backward position
directly, the motor will first stop shortly, then start turning to the reverse
direction.
