manualshive.com logo in svg

ePropulsion NAVY 6.0 Series, User Manual

Share
Download
ePropulsion NAVY 6.0 Series User Manual Download Page 26

24

Icons

  Functions

Over-heat alert

Hidden: system temperature is in 
normal range.
Blink: system temperature is a little 
high and the maximum input power of 
motor has been lowered than 3KW.   
Shown constantly: system is over 
temperature and the outboard will 
stop working. The outboard motor 
can’t be started until the system 
temperature drops to a certain level.

Kill switch 

status indicator

Hidden: kill switch is present and is 
working well.
Shown constantly: the kill switch is 
detached.

Current speed

Displaying real time cruising speed. 
Set units (KM/H,MPH or KNOTS) in 
preference setting page.  

Distance/time

display

Displaying real time travel distance/time. 
Set units (MILE, KM (kilometer) and NM 
(nautical mile)) in preference setting page.
The time unit is HR (hour).

Travelled 

distance/time 

or remaining 

distance/time

  : Remaining distance or time that 
outboard can travel.
Set units (MILE, KM (kilometer) and NM 
(nautical mile)) in preference setting page.
  : Travelled distance or time.

Summary of Contents for NAVY 6.0 Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands