Operating Kit MMS 6950W
Page
3
Software Installation
1.
OPERATING KIT MMS 6950W DOPS/DAPS
The
MMS 6950W
configuration kit serves the configuration of
MMS 6350
speed monitors and
of
MMS 6250
shaft position monitors of the Protection Systems DOPS/DAPS as well as the
visualization of measuring results and monitor states.
The operating kit (code no. 9510-00005) comprises the following parts:
Pos. Number
Code no.
Designation
1
1
6602-00004 CDROM with configuration software and operating manuals
DOPS / DAPS
2
1
6540-00009 Installation instruction for the configuration software
3
1
5700-00003 Configuration cable, length approx. 2m, with a 9-pole sub D con-
nector and a 6-pole mini DIN connector for connection of the
MMS 6350 to a computer.
4
1
4108-00045 Adapter 9 pole sub D to 25-pole sub D.
5
2
3804-00002 2 test cables, length approx. 1m with SMB-coax plugs to connect
oscilloscopes to DOPS/DAPS monitors.
6
2
4108-00046 Adapter SMB - BNC
The CD ROM includes the installation software <
MMS6950W.exe
> as well as operating manu-
als for
MMS 6250
and
MMS 6350
monitors,
MMS 6351/..
backplanes and further DOPS sys-
tem components.
Realization of applications, configuration and commissioning of DOPS or DAPS
systems may only be carried out by personnel trained on these systems and famil-
iar with MMS problems. In doing so, the instructions and notes contained in the
operating manuals have to be followed.
2.
INSTALLATION AND START OF THE CONFIGURATION PROGRAM
2.1
Prerequisites
If not ordered otherwise by the customer, upon delivery the
MMS 6000
modules are config-
ured with standard parameters. The required settings for the customer application must be
chosen and loaded with the help of the configuration software.
The DOPS/DAPS operating kit contains a CDROM with the configuration software to be in-
stalled on a computer. With this configuration software, the parameter setting for the
MMS
6250
or
MMS 6350
modules can be created or loaded from existing files.
Configuration of DOPS/DAPS modules can be made in two ways:
1. The PC (laptop) is not connected to a module. The configuration for one or several
DOPS/DAPS modules is edited on the PC with the help of the configuration software and
stored in one or more files. At any time later, with a communication between computer and
module, the PC files with the configuration parameters are then loaded into the modules.
2. The PC (laptop) has a connection to a
MMS 6350
module, the configuration is made/edited
on the PC and transferred immediately to the module.
