EP-P80P+
Page 14
Diagnostic Card Usage
52 Memory testing/initialization above 1M complete.
Going to save memory size information.
53 Memory size information is saved. CPU registers are saved.
Going to enter in real mode.
54 Shutdown successful, CPU in real mode. Going to disable
gate A20 line and disable parity/NMI.
57 A20 address line, parity/NMI disable successful.
Going to adjust memory size depending on relocation/shadow.
58 Memory size adjusted for relocation/shadow.
Going to clear Hit <DEL> message.
59 Hit <DEL> message cleared. <WAIT...> message displayed.
About to start DMA and interrupt controller test.
60 DMA page register test passed. To do DMA#1 base register test.
62 DMA#1 base register test passed. To do DMA#2 base register test.
65 DMA#2 base register test passed. To program DMA unit 1 and 2.
66 DMA unit 1 and 2 programming over.
To initialize 8259 interrupt controller.
7F Extended NMI sources enabling is in progress.
80 Keyboard test started. clearing output buffer, checking for stuck key,
to issue keyboard reset command.
81 Keyboard reset error/stuck key found. To issue keyboard controller
interface test command.
82 Keyboard controller interface test over. To write command byte and
init circular buffer.
83 Command byte written, Global data init done. To check for lock-key.
84 Lock-key checking over. To check for memory size mismatch with
CMOS.
85 Memory size check done. To display soft error and check for password
or bypass setup.
86 Password checked. About to do programming befoe setup.
87 Programming before setup complete. To uncompress SETUP code
and execute CMOS setup.
88 Returned from CMOS setup program and screen is cleared.
About to do programming after setup.
89 Programming after setup complete.
Going to display power on screen message.
8B First screen message displayed. <WAIT...> message displayed.
PS/2 Mouse check and extended BIOS data area allocation to be
done.