EPOX EP-MVP3G-M, User Manual, Page: 35 / 54

BIOS EP-MVP3G-M/2/5
Page 4-13
PNP OS Installed: Do you have a PNP OS installed on your system.
The default is No.
Yes: Select if you are using a PNP OS
No: Select if your OS does not support PNP.
Resources Controlled By:The default value is Auto.
Manual: The field defines that the PNP Card's resource is controlled by
manual. You can setup whether IRQ-X or DMA-X is assigned to PCI/
ISA PNP or Legacy ISA Cards.
Auto: If your ISA card and PCI card are all PNP cards. Set this field to
"Auto". The BIOS will assign the interrupt resource automatically.
4-5 PNP/PCI CONFIGURATION
The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ signals
when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING : Any misplacing IRQ could cause system can't pick out the rescouces.
ROM PCI/ISA BIOS (2A5LEPAE)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
ESC : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 1: No Change (Shift) F2 : Color
F7 : Load Setup Defaults
Figure 4-6 PCI CONFIGURATION SETUP
PNP OS Installed : No CPU ot PCI Write Buffer : Enabled
Resources Controlled By : Auto PCI Dynamic Bursting : Enabled
Reset Configuration Data : Disabled PCI Master 0 WS Write : Enabled
PCI Delay Transaction : Disabled
PCI#2 Access #1 Retry : Disabled
AGP Master 1 WS Write : Enabled
AGP Master 1 WS Read : Disabled
PCI IRQ Actived By : Level
Assign IRQ For USB : Enabled
Assign IRQ For VGA : Enabled