EPOX EP-MVP3G-M, User Manual, Page: 25 / 54

BIOS EP-MVP3G-M/2/5
Page 4-3
4-2 BIOS FEATURES SETUP
By selecting the "BIOS FEATURES SETUP" option in the CMOS SETUP UTILITY
menu, user can change system related parameters in the displayed menu. This menu
shows all of the manufacturer's default values of this mainboard. Again, user can move
the cursor by pressing direction keys and <PgDn> or <PgUp> keys to modify the
parameters. Pressing [F1] key to display help message of the selected item.
Note: If the Primary Master/Slave and the Secondary Master/Slave are
set as "Auto", the hard disk size and model will be auto-detected.
Note: The "Halt On :" field is to determine when to halt the system by the
BIOS if an error occurrs.
ROM PCI/ISA BIOS (2A5LEPAE)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Figure 4-3 BIOS FEATURES SETUP
Virus Warning : Disabled Video BIOS Shadow : Enabled
CPU Internal Cache : Enabled C8000-CBFFF Shadow : Disabled
External Cache : Enabled CC000-CFFFF Shadow : Disabled
Quick Power On Self Test : Enabled D0000-D3FFF Shadow : Disabled
Boot Sequence : A, C, SCSI D4000-D7FFF Shadow : Disabled
Swap Floppy Drive : Disabled D8000-DBFFF Shadow : Disabled
Boot Up Floppy Seek : Enabled DC000-DFFFF Shadow : Disabled
Boot Up NumLock Status : On
Gate A20 Option : Fast
Memory Parity/ECC Check : Disabled
Typematic Rate Setting : Disabled
Typematic Rate (Chars/Sec) : 6
Type matic Delay (Msec) : 250
Security Option : Setup
PCI/VGA Palette Snoop : Disabled
OS Select For DRAM > 64MB : Non-OS2
HDD S.M.A.R.T. capability : Disabled
Report No FDD For WIN 95 : Yes
Virus Warning: This category flashes on the screen. During and after the system
boots up, any attempt to write to the boot sector or partition table of the hard disk
drive will halt the system and an error message will appear. You should then run an
anti-virus program to locate the virus. Keep in mind that this feature protects only
the boot sector, not the entire hard drive. Default value is Disabled.