EPOX EP-MVP3G-M, User Manual, Page: 32 / 54

BIOS EP-MVP3G-M/2/5
Page 4-10
4-4 POWER MANAGEMENT SETUP
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP
UTILITY to display the following screen. This menu allows the user to modify
the power management parameters and IRQ signals. In general, these parameters
should not be changed unless it is absolutely necessary.
ACPI function: Use this to enable or disable ACPI power management functions.
The default is enabled.
Enabled: Enabled ACPI power management functions.
Disabled: Disabled ACPI power management functions.
You can only change the content of Doze Mode, Standby Mode, and Suspend
Mode when the Power Management is set to 'User Define'.
Power Management: Use this to select your Power Management selection.
The default is User define.
Disabled: The system operates in NORMAL conditions (Non-GREEN),
and the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in
each mode.
Figure 4-5 POWER MANAGEMENT SETUP
ROM PCI/ISA BIOS (2A5LEPAE)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
ACPI function : Enabled
Power Management : User Define
PM Control by APM : Yes
Video off Option : Suspend -> Off
Video off Method : V/H SYNC+Blank
MODEM Use IRQ : 3
Soft-off by PWRBTN : Delay 4 Sec
**PM Timers **
HDD Power Down
: Disable
Doze Mode : Disable
Suspend Mode : Disable
** PM Events **
VGA
: OFF
LPT & COM : LPT /COM
HDD & FDD : O N
DMA /master : OFF
Modem Ring Resume : Disabled
RTC Alarm Resume : Disabled
Primary INTR : ON
IRQ3 (COM 2) : Primary
IRQ4 (COM 1) : Primary
IRQ5 (LPT 2) : Primary
IRQ6 (Floppy Disk) : Disabled
IRQ7 (LPT 1) : Primary
IRQ8 (RTC Alarm) : Disabled
IRQ9 (IRQ2 Redir) : Secondary
IRQ10 (Reserved) : Secondary
IRQ11 (Reserved) : Secondary
IRQ12 (PS/2 Mouse) : Primary
IRQ13 (Coprocessor) : Primary
IRQ14 (Hard Disk) : Primary
IRQ15 (Reserved) : Disabled