EPOX EP-D3VA, User Manual, Page: 56 / 90

BIOS Setup
2=CA#$
PNP/PCI Configuration Setup
The PNP/PCI configuration section is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQs may cause the system to not find certain devices.
PNP OS Installed: Do you have a PNP OS installed on your system. The default is No.
Resources Controlled By: Allows manual setting of resources or automatic by
the PNP BIOS. The default is Manual.
Manual: PNP Cards resources will be controlled manually. You can set which
IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy ISA
Cards.
Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign the
interrupt resource automatically.
Reset Configuration Data: This setting allows you to clear ESCD data. The
default is Disabled
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they
were recorded into ESCD (Extended System Configuration Data),
you can set this field to Enabled in order to clear ESCD.