
Features
EP-BX3
Page 2-1
Section 2
FEATURES
EP-BX3 Features:
•
EP-BX3 is based on the Pentium
®
II or Pentium
®
III Processor operating at 233
~ 333MHz (66MHz) or 350 ~ 500MHz (100MHz) on Slot 1. The board is
configured by an Easy-Setting-Daul-Jumper (E.S.D.J.) to match your CPU
clock speed.
•
Designed with Intel’s 82443 BX AGPset.
•
Supports up to 768 MB of DRAM (minimum of 16 MB) on board, You can
use 168-pin DIMM x 3. It will automatically detect Extended Data Output
(EDO) DRAM at 66MHz only or Synchronous DRAM memory (SDRAM) at
66MHz or 100MHz (please see Section 3-2).
•
EP-BX3 will support Error Checking and Correcting (ECC) when using paritys
DRAM memory modules. This will detect multiple bit errors and correct 1-bit
memory errors.
•
Supports (2) 16 bit ISA slots, (5) 32 bit PCI slots, (1) AGP slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33 devices. The EP-BX3 supports (5) PCI
Bus Master slots and a jumperless PCI INT# control scheme which reduces
configuration confusion when plugging in PCI card(s).
•
Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE
interfaces.
•
Designed with Winbond W83977TF Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported
•
Includes a PS/2 mouse connector.
•
Allows use of a PS/2 keyboard.
•
Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com
please visit our Technical Support section for the latest updates)
Summary of Contents for EP-BX3
