manualshive.com logo in svg

EPOX EP-6VBA2, User Manual, Page: 3 / 71

Share
Download
EPOX EP-6VBA2 User Manual Download Page 3

EP-6VBA2

Technical Support Services

If you need additional information, help during installation or normal use of this
product, please contact your retailer.  Your retailer will have the most current
information about your configuration.  If your retailer cannot help, you may visit
our online technical support website and/or contact our support technicians at the
locations listed below.

Record your serial number before installing your EP-6VBA2 mainboard.  (The
serial number is located near the ISA slots at the edge of the board.)

EP-6VBA2 serial number:  _________________________________

Contacting Technical Support

EPoX technical support is working hard to answer all of your questions online.
From our website you can find answers to many common questions, drivers, BIOS
updates, tech notes, and important technical bulletins.  If you are still unable to
locate the solution you are seeking, you always have the option to contact our
support technicians directly.

North American website (English language)

http://www.epox.com
[email protected]
[email protected]

European website (Multi-language)

http://www.epox.nl
[email protected]
[email protected]

Taiwan website (Chinese language)

http://www.epox.com.tw
[email protected]
[email protected]

Thank you for using EPoX mainboards!

Copyright 1999 EPoX Computer Company.  All rights reserved.

Summary of Contents for EP-6VBA2








































































Reviews:

No comments