EPOX EP-6VBA2, User Manual, Page: 25 / 71

Installation EP-6VBA2
Page 3-9
Device Connectors
(continued)
(This is connected to the power button on the case. Using the Soft-Off
by Pwr-BTTN feature, you can choose either Instant Off (turns system
off immediatly), or 4 sec delay (you need to hold the button down for
4 seconds before the system turns off). When the system is in 4 sec
delay mode, there is a special feature to make the system to go into
suspend mode when the button is pressed momentarily).
Turbo LED indicator -
LED ON when higher speed is selected
IDE LED indicator -
LED ON when Onboard PCI IDE Hard disks
is activate
J3
1
+
+
IR Connector
1. VCC 4. GND
2. NC 5. IRTX
3. IRRX
1
Power On/Off
J2
Speaker -
Connect to the system's speaker for beeping
1. Speaker 3. GND
2. N/C 4. GND
Reset -
Closed to restart system.
Power LED -
Power LED connector
1. Power LED(+) 4. NC
2. N/C 5. GND
3. GND
1
1
1