AWARD BIOS 3-9
3-4 POWER MANAGEMENT SETUP
Choose the "POWER MANAGEMENT SETUP" in the CMOS SETUP
UTILITY to display the following screen. This menu allows the user to modify
the power management parameters and IRQ signals. In general, these parameters
should not be changed unless it is absolutely necessary.
Figure 3-5 POWER MANAGEMENT SETUP
ROM PCI/ISA BIOS(2A5LEPA9)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Again, users can move the cursor by pressing direction keys to the field needed to be
modified and press <PgDn> or <PgUp> to alter item selection. You can only change
the content of Doze Mode, Standby Mode, and Suspend Mode when the Power
Management is set to 'User Define'.
3-3-1 The Description of the Power Management
A. Power Management mode selection :
Disabled : The system operates in NORMAL conditions (Non-GREEN)
and the Power Management function is disabled.
Max. saving: This mode will maximize the power saving capability.
Min. saving: This mode will minimize the power saving capability.
User define: Allow user to define time-out parameters to control power saving
mode. Refer to item B shown below.
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Power Management
: User Define
Primary INTR
: ON
PM Control by APM
: Yes
IRQ3 (COM 2)
: Primary
Video off Option
: Suspend -> Off
IRQ4 (COM 1)
: Primary
Video off Method
: V/H SYNC+Blank
IRQ5 (LPT 2)
: Primary
Soft-off by PWRBTN
: Delay 4 Sec
IRQ6 (Floppy Disk)
: Disabled
** RM Timers **
IRQ7 (LPT 1)
: Primary
HDD Power Down
: Disable
IRQ8 (RTC Alarm)
: Disabled
Doze Mode
: Disable
IRQ9 (IRQ2 Redir)
: Primary
Suspend Mode
: Disable
IRQ10 (Reserved)
: Primary
** RM Events **
IRQ11
(Reserved)
: Primary
VGA
: OFF
IRQ12 (PS/2 Mouse)
: Primary
LPT & COM
: LPT /COM
IRQ13 (Coprocessor)
: Primary
HDD & FDD
: OFF
IRQ14 (Hard Disk)
: Primary
DMA /master
: OFF
IRQ15 (Reserved)
: Disabled
Modem Ring Resume
: Disabled
MODEM Use IRQ
: Enabled
RTC Alarm Resume
: Disabled
