EPOX EP-3WXM User Manual Download

Page: 12 / 68

Introduction

EP-3WXM/2/4

Page 1-6

EP-3WXM/2/4 Form-Factor

The EP-3WXM/2/4 is designed with Micro-ATX form factor - the new industry

standard of chassis. The Micro-ATX form factor is essentially a Baby-AT base-

board rotated 90 degrees within the chassis enclosure and a new mounting

configuration for the power supply. With these changes the processor is relocated

away from the expansion slots, allowing them all to hold full length add-in cards.

Micro-ATX defines a double height aperture to the rear of the chassis which can

be used to host a wide range of onboard I/O. Only the size and position of this

aperture is defined, allowing PC manufacturers to add new I/O features (e.g.; TV

input, TV output, modem, LAN, etc.) to systems. This will help systems integra-

tors differentiate their products in the marketplace, and better meet your needs.

•

Smaller size promotes a smaller system size.

•

I/O shield does not need to be retooled in an ATX 2.01 or later. Mainboard

could be used in an ATX 2.01-compliant.

•

A smaller power supply cam be used. High integration on mainboard reduces

the system costs.

Full length
slots

Expandable I/O

Figure 2: Summary of Micro-ATX chassis features

CPU located near
Power Supply

Single chassis
fan for
system

Micro-
ATX
Power
Supply

ATX power
connector

Floppy / IDE
connectors
close to
peripheral
bays

5 1/4"

Bay

3 1/2"

Bay

Summary of Contents for EP-3WXM





































































Search results

Summary of Contents for EP-3WXM

Reviews:

Related manuals for EP-3WXM

Brands by name

Popular brands

EPOX EP-3WXM, User Manual

Search results

Summary of Contents for EP-3WXM

Reviews:

Related manuals for EP-3WXM

Brands by name

Popular brands