EXPAND 80T
Bluetooth Speakerphone
Using the speakerphone
18
Using the speakerphone
Turning the speakerphone and the expansion microphone(s) on
X
Press the Power on/off button.
The LED lights up white. The expansion microphone turns on automatically and the LED lights up dimmed.
Connecting / disconnecting Bluetooth
®
devices
Connecting Bluetooth devices
Depending on the setting for personal/shared mode (see page 28).
A:
Shared mode
The speakerphone is by default in shared mode. In this mode pairing must be performed every time when connecting a
device via Bluetooth.
•
B NFC
see page 14 or
•
C Bluetooth
see page 15 or
•
D Dongle
see page 16
B:
Personal mode
The speakerphone will by default attempt to connect to the two last connected Bluetooth devices.
3x
X
Activate Bluetooth on the paired device(s).
The LED flashes blue while the speakerphone attempts to connect to previously paired Bluetooth device(s). Once the
connection is successfully established, the LED lights up blue.
If the Bluetooth LED does not flash blue (automatic search after switch-on):
X
Press the Bluetooth button to connect manually.
i
Only two out of the maximum eight paired Bluetooth devices can be simultaneously connected to the
speakerphone.
The search for paired devices will timeout if no devices are found. After this, connections must be established
manually on the paired Bluetooth device or by pressing the Bluetooth button on the speakerphone
EXPAND 80T
Bluetooth Speakerphone
Using the speakerphone
19
Disconnecting Bluetooth device(s)
X
Press the Bluetooth button. The LED turns off.
OR
Deactivate Bluetooth on the connected device.
To re-connect paired Bluetooth devices (personal mode only):
X
Press the button again.
Turning the speakerphone and the expansion microphone(s) off
3x
2s
X
Press and hold the Power on/off button.
The LED flashes red 3 times and turns off. All volume settings are saved. The expansion microphone turns off.
