page | 2
www.snapav.com Support 866.838.5052
INTRODUCTION
Thank you for purchasing Episode® Electronics. To complete installation, follow
these guidelines. Visit our website for design recommendations and speaker
calculators.
Subwoofer placement can have a large impact on the overall sound quality of low
frequencies. This Episode® wireless subwoofer kit allows subwoofer placement
anywhere in the room without running wires.
CONTENTS
• 1x Wireless transmitter
• 1x Wireless receiver
• 2x Power supply
SETUP
SYSTEM CONNECTIVITY
1.
Use high-quality shielded RCA cables with low impedance, and high-quality
connectors. Connect the wireless transmitter to the AV receiver utilizing a
dedicated subwoofer connection (LFE) or L/R preamp output or to a TV using
an RCA cable.
2.
Use a dedicated subwoofer connection (LFE) or left/right preamp output.Connect
the wireless to the LEFT or LFE input on the subwoofer. A splitter may also
be used to send the signal to both the LEFT/RIGHT input for higher volume
levels on some subwoofers.
Refer to the subwoofer owner’s manual for specific information on connections
and setup.
100-240V 50/60Hz
HIGH LEVEL INPUT
LFE
ES-SUB-EVO6-100
VOLUME
PHASE
AUTO
STATUS
OFF
ON
R
L
R
L
1.6A
Designed and Engineered in USA
Manufactured in China
CROSSOVER
LOW LEVEL
0
˚
180
˚
50
100
LFE
MIN
MAX
IN
R
L
(LFE)
OUT
OUT
IN
IR
UPDATE
OPERATE
TRIGGER
DC 12V
EA-AMP-SUB-1D-500R
SUB 1
SUB 2
Total Impedance
(Sub 1 + Sub 2) Minimum 4Ω
100-120V AC
220-240V AC
FUSE T8AL/250V
100-120V~60Hz/220-240V~50Hz 500WATTS
Designed and Engineered in USA
Made in China
A/V Receiver
Transmitter
RCA Output on TV
Receiver
Subwoofer
Subwoofer Cable
RCA
Cable
Preamp or
Subwoofer (LFE)
Output
www.snapav.com Support 866.838.5052
