page | 3
© 2015 Episode®
SUBWOOFER PLACEMENT
Subwoofer placement has an effect on overall audio performance.
The strongest audio output will likely occur if the subwoofer is placed in a corner
of the room on the same wall as the front channel speakers. This is known as
the boundary effect and will emphasize certain bass frequencies while canceling
others. Some listeners will find this to be the best sounding result, while others
may find it overly “boomy” or muddy.
Once the wireless kit is paired, experiment with subwoofer placement to find the
location that delivers the best audio performance.
PAIRING YOUR EPISODE® WIRELESS KIT
Initial pairing may be performed without the audio signals connected. This may be
preferred for easier access to the pairing buttons and power connections.
Follow the instructions below to pair wireless transmitter and receiver.
1.
Plug in all transmitters and receivers.
The power cords can be routed
through the strain relief detail to
prevent the cord from being pulled
out.
2.
Press and hold the pair button on the
receiver until the LED flashes. Repeat
this procedure for all receivers if
using more than one.
NOTE:
Up to 4 receivers may be paired to
1 transmitter
3.
Press and hold the pair button on the
Transmitter.
4.
All LEDs should stop flashing and stay solid within 5 seconds.
5.
Unplug all units and mount in final locations. Pairing is persistent and will not
be lost when unplugged.
NOTE:
Wireless devices may be susceptible to RF interference from other
devices. To reduce potential interference and maximize wireless performance,
check the proximity to other wireless devices and relocate them accordingly if
interference is present. Signal interference created by microwave ovens, ceiling
fans,or other appliances will subside when those devices are not in use.
Pair
Button
Receiver
Strain Relief
Detail
Transmitter
Pair Button
Strain Relief
Detail
© 2015 Episode®
