background image

page | 11

© 2018 Episode®

REFERENCE

CONNECTIONS AND CONTROLS

ES-SUB-ELE8-250

100-120V

220-240V

POWER

HIGH LEVEL

CROSSOVER

PHASE

VOLUME

STATUS

LFE

LOW LEVEL

AUTO

OFF

ON

IN

IN

L

R

OUT

OUT

ES-SUB-ELE8-250

Designed and Engineered in USA

 Manufactured in China

50

LFE

0

˚

180

˚

100

MIN

MAX

100-120V~60Hz 1.6A /

220-240V~50Hz 0.8A

DC 5V

/500mA

8

7

9

10

11

12

6

5

3

2

1

4

1.  Status Led

Red- Subwoofer is in standby mode, or power mode switch is set to OFF. AC power is present.
Blue- Subwoofer power mode switch is set to ON, or is set to AUTO and signal is being received.

2.  Power Mode Switch

3 way toggle switch for setting power mode to OFF, AUTO, or ON.

3.  Volume Knob

Adjust subwoofer volume.

4.  Phase Knob

Set the phase of the subwoofer in relation to the listening area. Continuously variable from 0 to 180°.

5.  Crossover Knob

Adjust the crossover frequency (limits the highest frequency the subwoofer will play).

Note: 

Set the crossover knob to “LFE” if the LFE input is used.

6.  LOW LEVEL Inputs & Outputs (RCA)

For left/right or LFE connections from audio source, and outputs for connecting other equipment. To connect 

LFE, use the L (left) channel connections.

7.  HIGH LEVEL Inputs & Outputs (Speaker Wire Binding Post)

Connect left/right connections from speaker cable runs, and loop to other speakers.

8.  Voltage Selector Switch

Select the input voltage. Default: 100-120V.

9.  Master Power Switch

Rocker switch to turn power off to the subwoofer. Power LED will be off if switch is off but power is present.

10.  Power Cord Inlet

Connect the included cord for providing power.

11.  USB Port

A 5V USB port on the subwoofer back panel provides a power source for an Episode Wireless receiver.

Note: 

Successful operation is not guaranteed with devices other than the Episode Wireless Kit. (Wireless Kit 

sold separately.

12.  Wireless Receiver Holding Bolts

Secure the Wireless receiver to the subwoofer.

Summary of Contents for ES-SUB-ELE10-450

















Reviews: