2. Installation and Getting Started
Quick Installation
Install Guide
Page 9
To connect the VGA or DVI source to the VGA Bridge
Transmitter
You can select any VGA Bridge device to be the transmitter. The
device automatically operates as a transmitter when connected to
an active VGA or DVI source.
At the location of the VGA or DVI source:
1
Select a VGA Bridge device.
2
Connect the VGA or DVI source to the VGA Bridge INPUT
port using a VGA or DVI cable.
If you are connecting a VGA source, you require a VGA to
DVI converter. You can also use an active splitter to split the
VGA or DVI signal.
Figure 3: Location of the VGA Bridge INPUT and OUTPUT ports
3
You can also optionally connect a VGA or DVI monitor or
projector to the VGA Bridge transmitter OUTPUT port.
If you are connecting a VGA monitor, you require a DVI to
VGA converter. You can also use an active splitter to split this
VGA or DVI signal.
4
Connect the VGA Bridge Eth 1 Ethernet port to the Ethernet
LAN.
You can power on the VGA Bridge transmitter now or wait
until you have connected the VGA Bridge receiver.
INPUT
OUTPUT
