epiphan VGA Bridge, Install Manual

Page: 12 / 18

2. Installation and Getting StartedUsing the Network Discovery Utility to Find the IP Addresses
Page 16 VGA Bridge
Using the Network Discovery Utility to
Find the IP Addresses of VGA Bridge
Devices
You can use the Epiphan Network Discovery Utility on a
Windows PC to find the VGA Bridge devices and their IP
addresses on the network. You can also use the Network
Discovery Utility to connect to the Web admin interface.
The VGA Bridge device must be assigned an IP address on the
network. The devices can get IP addresses from a DHCP server if
there is one available. If the network does not have a DHCP
server, see “If the Network Does Not Have a DHCP Server” on
page 18 .
This section assumes that the network has a DHCP server and
that it gives the VGA Bridge devices IP addresses on the network.
To install the Network Discovery Utility
1 Find the latest Network Discovery Utility on the VGA Bridge
download page:
http://www.epiphan.com/products/broadcasting/
vga-bridge/download/
Web
admin
interface
Use the Web admin interface for changing the
device’s IP address, changing the transmitter and
receiver configuration, making Frame Grabber
Adjustments, and installing new firmware. You can
log into the Web admin interface by selecting Web
config from the Network Discovery Utility or by
opening a web browser and browsing to:
http://<VGA Bridge_IP_Address>/ admin/
User Name: admin (no password)
The Web admin interface is described in the VGA
Bridge User Guid e.