LiveScrypt User Guide
Audio options
Audio options
If you went through the Get started section, you already have a basic setup with some audio sources
connected to the LiveScrypt device. This section contains additional information and audio options you can
setup using the touch screen, the web interface, and AV Studio when your LiveScrypt device is paired with
your AV Studio team.
Topics:
l
Enable or disable phantom power
l
l
l
Assign audio sources to an input
For information about monitoring audio, see
Enable or disable phantom power
Phantom power is not enabled on the XLR audio input ports by default on LiveScrypt. You can enable 48 V
Phantom power for the two XLR ports using the touch screen, the web interface, and AV Studio when the
LiveScrypt device is paired with your AV Studio team.
When phantom power is enabled:
l
48 V phantom power is applied to both XLR port 1 and XLR port 2.
l
The phantom power LED beside the XLR/TRS combo jacks on the rear panel of LiveScrypt is solid on.
l
Phantom power is not applied to the ¼" TRS inputs of the combo jacks.
Connecting devices that are not designed for phantom power when phantom power is enabled
for the two XLR ports can seriously damage those devices. Always check the phantom power LED
before connecting devices to the XLR ports. A direct box can be used to provide the correct mic-
level signal to the XLR port and offers some isolation protection in case of accidental exposure to
48 V phantom power.
To enable or disable phantom power:
43