7
3
3.
Tip: Avoid pinching the Sensor Wire
Harness (155).
Set a sturdy piece of packing material under the
rear of the Frame (1).
Have a second person
hold the Frame to prevent it from tipping
while you complete this step.
Insert the Rear Stabilizer (5) into the Frame (1).
Attach the Rear Stabilizer with four M8 x 16mm
Screws (72);
start all four Screws, and then
tighten them.
Remove the packing material.
4. Untie and discard the wire tie (not shown) on the
Sensor Wire Harness (155).
While a second person holds the Rear Stabilizer
Cover (2) near the Rear Stabilizer (5), connect
the wire on the Ultrasonic Sensor (147) to the
Sensor Wire Harness (155). Insert the excess
wire into the Rear Stabilizer.
Tip: Avoid pinching the Sensor Wire Harness
(155).
Press the four Mounts (117) on the under-
side of the Rear Stabilizer Cover (2) into the
Rear Stabilizer (5).
4
72
155
72
2
5
155
147
117
1
5
Avoid pinching
the Sensor Wire
Harness (155)
Avoid pinching
the Sensor Wire
Harness (155)
