Epever TP10K, User Manual, Page: 6 / 40

3

Touch the wire end, which hasn't been insulation treated and maybe electriferous.

Touch the wiring copper row, terminals, or internal devices which may be electriferous.

The power cable connection is loose.

Screw or other spare parts inadvertently falls into the inverter.

Improper operations by untrained non-professional or technical personnel.
WARNING
Once an accident occurs, it must be handled by professional and technical
personnel. Any incorrect operation would cause a more severe accident.
9. Safety cautions for stopping the inverter

Firstly turn off the breakers on the utility input side and AC output side, then turn off the DC switch;

After the inverter stop working for five minutes, the internal conductive devices could be touched;

The inverter can be restarted after removing the faults which may affect its safety performance;

There are no maintenance parts in the inverter; please contact our after-sales service personnel if
any maintenance service is required.
10. Safety cautions for inverter maintenance

Testing equipment is recommended to check the inverter to make sure there is no voltage or current;

When conducting electrical connection and maintenance work, must post temporary warning signs
or put up barriers to prevent unrelated personnel from entering the electrical connection or
maintenance area;

Improper maintenance operation to the inverter may cause personal injury or equipment damage;

Please wear an anti-static wrist strap to prevent static damage or avoid unnecessary contact with the
circuit board.
CAUTION
The inverter's safety mark, warning label, and nameplate should be visible, not
removed or covered.