Epever TP10K, User Manual, Page: 14 / 40

11
TP30K
TP30KB
42mm
2
/1AWG DC/2P
—200A
TP40K
TP40KB
50mm
2
/1/0AWG DC/2P
—250A

Wire and circuit breaker selection for AC output
Model AC wire size Breaker
TP10K
TP10KB
25mm
2
/3AWG AC/2P
—63A
TP20K
TP20KB
35mm
2
/1AWG AC/2P
—100A
TP30K
TP30KB
42mm
2
/1AWG AC/2P
—150A
TP40K
TP40KB
50mm
2
/1/0AWG DC/2P
—200A
IMPORTANT

The wire size is for reference only. Use thicker wires to lower the voltage drop and
improve the system performance when the distance between utility and inverter or
between inverter and batter is far.

The above wire size and circuit breaker size are for recommendation only. Please
choose a suitable wire and circuit breaker according to the practical situation.
2.3 Instructions
Installation steps:
Step1: Professional personnel read this manual carefully.
Step2: Determine the installation location and heat dissipation space.
Move the equipment: as the equipment is relatively large, it is recommended to use a forklift or crane;
if the ground is flat, it can be moved by wheels.
Place the equipment: As the equipment is heavy, it is recommended to be placed on flat ground, with
300mm space reserved all around, to ensure heat dissipation.
Fix the equipment: If the optional caster is chosen, rotate counterclockwise to fix and rotate clockwise
to move.
WARNING
Risk of explosion!
Never install the inverter with flooded batteries in a sealed enclosure! Do not install the
device in a confined area where battery gas can accumulate.