24
to save or press
button to cancel. ―
S
ave success!‖ will be promoted if
adjusted and save operated successfully.
Input Password
000000
Save Cancel
Save success!
NOTE
：
The log after the current time will be erased when the clock have be
adjusted.
Device Parameter
There are 2 interfaces about device parameter as shown blew:
Press
to enter the Device Parameter interface when the inverse cursor
point to
Device Para
item. Press
button to exit.
You should input the user password (see above) before setting the
parameters.
The first interface shows the 4-
digit controller‘s ID in networking and keeps the
ID number unique in the networking or PC software or other device(s)
couldn‘
t
search it.
The 2
nd
interface shows the backlight time. The range is from 1 to 90 seconds
(60seconds default).
―–‖
means that the backlight is never off. The interval log
is from 1 to 30 minutes (10minutes default).
Control Parameter
Press OK to enter the Device Parameter interface when the inverse cursor
point to
Control Para
item. Press
button to exit. There are 9 interfaces
for ‗Control Parameter‘ as shown below.
Local ID
T03-0001
Backlight Time
60 s
Storage Interval
10min
