When you find that a print has failed or there is solid residue in
the resin vat, you must filter the resin in order to protect the LCD.
Clean the resin in the resin vat by filtering out the solid residue
using one of the provided filters or a paint filter which can be
found online or at your local hardware store. If ignored, when
the build plate dips into the vat, the force of the plate may crush
residues, puncture the film and damage the LCD. This is a costly
mistake.
If there is residual resin in the resin vat or on the build plate’s
outer surface, please clean with a soft tissue soaked in IPA to
avoid it dropping into the machine and curing inside.
Always wear gloves, a respirator mask and protective goggles
when handling liquid resin or a print before the post-processing.
Only touch the print without gloves after it’s been fully cleaned
and cured!
Print in a well-ventilated area. It is strongly recommended to use
a vent fan drawing air around the printer to outside the building.
Resin fumes can cause lung irritation!
PLEASE READ:
For printer instructions, videos, firmware updates, parts, supplies,
resins, and more please visit http://www.epaxdental.com/.
Customer Support Email: [email protected]
Join us on our Facebook group for active discussions and
knowledge-sharing:
https://www.facebook.com/groups/epaxdental/
IT IS STRONGLY RECOMMENDED THAT YOU WATCH OUR
TUTORIAL VIDEOS BEFORE OPERATING YOUR PRINTER FOR
THE FIRST TIME.
WARNINGS
Section VII.
12
ht
tp
s:
//
ep
ax
de
nt
al
.c
om
Summary of Contents for DX Cure Pro
Page 1: ...DENTAL USER MANUAL...
