The user is able to view live details about the received signal, like the received SNR in dB, the orbit position of
the satellite, the satellite name and the current state of the antenna (Power on / Searching / Optimize / Fine
Optimize).
Signal--to-Noise-Ratio
Satellite Position
Satellite Name
Antenna State
Status LEDS:
There are 3 LEDs on the ACU front-panel. The first RX LED represents the Receive Status of the Antenna
(Green – RX lock, Blue – No RX lock, white/off – No connection to antenna). The second LED
represents
the Network status in the ACU ( green – internet connection either via LTE or external gateway, blue – no
internet connection ). The last LED show the system errors ( Red – error in ACU, white /off – no errors).
Signal Strength:
The user can view the live Signal to Noise ratio (dB), signal power (dBm), the freqeuncy and symbol rate of
the received signal.
GPS Position:
This widget shows the GPS position, vessel speed and the heading according to the GPS antenna mounted
on the ODU.
ACU Diagnostics:
The ACU diagnostics report shows the live report of following ACU parameters: input voltage measured from
the PSU line
(Input Volt
), speed in rpm of backside fan (
fan1 speed
), temperature of 12V converter (
T12
Temp
), speed in rpm of board fan (
fan2 speed
), the Central Processing Unit temperature in centigrade (
CPU
Temp
), 12V converter current in Ampere (
I12 current)
, air temperature inside ACU in centigrade (
Rfbrd
temp
), relative percentage humidity inside ACU (
Humidity
).
Antenna Diagnostics:
The Antenna Diagnostics widget show the live report of the following Antenna parameters: The ODU voltage
in Volts (
ODU Volt
), the current consumption of the antenna (
ODU curr
), the received signal strength in dbm
(
Rssi
) and the temperature measured at the ODU regulator (
ODU temp
).
Traffic Overview:
This widget shows the network bandwidth of each interface of the ACU.
Antenna Orientation:
This widget shows the expected (Calculated) and current Azimuth, Elevation, Skew and Heading of the
antenna.
Logged in Users:
This widget shows the IP addresses of all the users
currently logged in to the system.
Network:
Here you can check the IP addresses of all the network
interfaces.
NMEA status
The user has the option to enable / disable transmission of
NMEA data from the vessel to the antenna.
It is possible to customize the overview page. To proceed,
click on the arrow icon as shown on the right. You can
simply show/hide each widget by clicking on the links. After
making changes, please click on “
Apply
” at the top of the
page to save your custom view.
Doc ID 0354 15.12.20
Page 20/33
Summary of Contents for DS13 PRO
Page 30: ...Drilling Pattern DSi6 Doc ID 0354 15 12 20 Page 30 33 Figure 8 1 Drilling Pattern 60cm TVRO...
Page 31: ...Drilling Pattern DS9 Doc ID 0354 15 12 20 Page 31 33 Figure 8 2 Drilling Pattern 90cm TVRO...
Page 32: ...Drilling Pattern DS13 Doc ID 0354 15 12 20 Page 32 33 Figure 8 3 Drilling Pattern 130cm TVRO...
