Installation
PE
CON+
®
www.epa.de
35
of
48
7.2
Installation conditions
WARNING
Follow the safety instructions in the section titled "Safety" and note the technical
data in the section titled "
Technical data
".
7.3
Operating conditions
The
PE
CON+
®
operates independently of its position and is designed for mounting on a
top-hat rail in accordance with DIN 50022.
It is designed for single and 3-phase TN-S networks.
Other conditions can be found in the section "Technical data".
7.4
Connection conditions
WARNING of hazardous electrical voltage
Risk to life from electric shocks! Death or serious injury!
To avoid electric shock, take appropriate precautions. The accident prevention
regulations for electrical systems and equipment must be observed when carrying
out all work.
WARNING
The terminals are intended solely for the purpose described in this operating
manual. These must not be used for any other purpose.
For safety reasons, the cables installed at the terminals must have a sufficiently
high dielectric strength and be insulated accordingly.
The device must be supplied with the voltage specified in the technical data. Higher
voltages higher can destroy the device.
The device must be fixed firmly into place while the power supply is disconnected
and no parts are live.
Improper wiring can destroy the device.
Moisture and humidity
Without condensation, relative humidity ≤ 98%
Installation altitude
≤ 2000 m above sea level
Soiling
Pollution degree 2 (EN 50178)
Summary of Contents for PECON+
Page 2: ......
Page 11: ...Important basic information PECON www epa de 9 of 48 1 10 Declaration of Conformity...
Page 51: ......
