22
15
Place the body with the filter side
up, as shown.
16
With the o-ring lip seal in the
holder, groove visible and facing
up, slide the holder into the body,
look through the Fuel in port to
check the position of seal, above the
cavity of the seal recess(see
cut way, step 10).
17
Coat the installation pin with
silicone grease and push the seal
through the holder and into the seal
recess of the body, remove the
installation pin and check for
proper installation by looking into
the Fuel in port. O-ring seal should
be seated in the seal recess and
groove should be visible.
