Product
M
aintenance
Common failure
Possible cause
Troubleshooting
The unit is not
working
The purification
effect is poor
Power cord is not plugged, or
power has no electricity
If above corrective actions are not able to solve the problem, please contact sales and after-sales
service assigned by our company. For safety, please do not disassemble the unit and maintain by
yourself to avoid damage.
Please follow the following instructions for the safety of personnel, equipment and the other electrical loads in the
system. Failure to do so may result in the damage of the equipment and harm to the personnel operating the unit, and
warranty void.
Do not plug or unplug the power by wet hands to avoid electric shock. Unplug the power while moving the purifier.
It is prohibited to use the device in moist area such as bathroom to avoid shock and accelerated aging of electrical
system.
The air purifying sterilizer is not designed for filtering kitchen smoke near around kitchen exhaust.
High-
voltage
negative ion module is contained inside of the device, do not repair or disassemble.
Please do not cover the air inlet and outlet
that
prevent the
efficient purification of the air.
It is prohibited to touch air inlet metal part and insert any foreign matter in air outlet, to avoid equipment malfunction.
In case any damage on the appearance or interior, or any abnormal noise, peculiar smell, smog, please cut off the
power in a safe way, and contact the EPL promptly. Please do not disassemble the product.
If the equipped power plug does not match with user socket, or damage occurs to the power cord, please contact the
EPL to change or allocate new parts. Please do not change the power cord
without EPL approval.
R
emove the plug if the product is not in use for a long time.
This product is not able to eliminate carbon monoxide or radon, thus, in case any fire or chemical disaster, it can not
be used as security liability or replacement option or ventilate equipment.
While replacing the filter or cleaning the inter
n
al parts, please turn off the power by On/Off button on the control panel
then remove the plug.
Safety Instructions
Plug in the power supply
Air output is low
Abnormal noise
from the unit
Power switch is not ON
Press ON/OFF button
Change the filter
End of service life
Air inlet/outlet is blocked
Wrong installation of the filter direction
The filter is too dirty
Change the filter
Install the filter in correct direction
Clear the inlet/outlet passages
Make sure all the plastic packaging is removed / check any damage on the
appearance before the operation
Make sure air inlet and outlet is not blocked by other
objects
, clean it if any
While turning on the negative ion function, "fizz" sounds is normal