EP Equipment EPL151, Operation Manual

Page: 41 / 52

REV. 12/2019
3 D
After operating for 1000 hours in total, the truck should also be maintained according to the
following procedures in addition to the 250-hour maintenance, 500-hour maintenance and 1000-
hour maintenance mentioned above
22 Inspect the running, lifting and lowering speed, braking distance and other
operation performances of the truck Inspect and add gearbox lubrication grease
23L Inspect and replace gearbox gear oil (for RPL201/
RPL201H
、
WPL201
)
24 Inspect where there is any damage in the oil cylinders and whether
corresponding installations are reliable
25L Clean the oil tank and replace the hydraulic oil
26
Inspect and replace the hydraulic filter
27 Inspect whether the bearing capacity reaches the rated load and implement
corresponding adjustment through the flood valve adopted in the hydraulic
station
28 Inspect whether all the labels are clear and intact
Table 1 Lubricants
Code Type Specification Amount Position
A
Anti-wear hydraulic oil L-HM32
0.48 L((WPL201/EPL151
/
HPL152)1.25(RPL201
/
RPL201H)
Hydraulic
System
Low temperature anti-wear
hydraulic oil (cold storage)
L-HV32
B
Multi-purpose grease
Polylub
GA352P
Appropriate amount
Sliding surface
(See Table 2)
C
Grease 3#(MoS
2
) -
110 grams(EPL151/
HPL152/WPL201)
Gearbox
D
Heavy duty gear oil 85W-90 GL-5 1500ml(RPL201/RPL201H) Gearbox
D
WPL201
RPL201
/
RPL201H EPL151
RPL201/RPL201H
EPL151/HPL152/WPL201
HPL152