REV. 12/2019
21
B
2.3.10
Operating the truck without its own drive system
If the truck has to be moved after a failure has
rendered it immobile, proceed as follows:
Set the emergency stop switch “OFF”.
Set the key switch “OFF” and remove the key.
Prevent the truck from rolling away.
Remove the cover.
Screw in two screws(1), M4*35mm)until the truck
can be moved (no braking action).
After setting down the truck at the destination,
un
screw two screws(1)
.
Braking action is restored.
•
•
•
This operating mode is not permitted
when negotiating inclines and gradients.
WARNING
Summary of Contents for EPL151
