Safe operating rules
01
02
1. Requirements for operator
The electric stacker must be operated by persons trained in operation. The operator shall be able to
carry out operation demonstration of moving and controlling goods for users, and he or she is responsible
for the electric pallet truck. Unauthorized persons are not allowed to operate the electric pallet truck. Do not
carry or lift passengers.
2. Faults and defects
If electric stacker failure or defects occur, immediately notify the management personnel. If the electric
pallet truck is not safe for operation (such as wheel worn or brake failed, etc.) , please stop using it before it is
fully repaired.
3. Hazardous area
The hazardous area usually refers to the area where the electric pallet stacker or its lifting device (e. g. forks,
attachments) will pose threat to persons during their operation or lifting process. Typically, this range extends
to the area where goods or vehicle accessories are lowered.
Unauthorized persons must leave the hazardous area. Whenever a situation causes possible harm to
persons, the operator must give a warning. If the unauthorized persons still stays in the hazardous
area after the warning is given, the operator must immediately stop the operation of the vehicle.
Warning
4. Safety devices and warning signs
Safety devices, warning signs and the above safety precautions must be heeded.
When handling the goods, the fork height must not exceed 300mm.
Warning
5. Passengers
Carrying or lifting of passengers is forbidden.
6. Keep distance
The truck should not be driven on public roads outside a specific area. Remember that the vehicle in front
of you may brake suddenly. Keep a reasonable distance.
7. Visibility
The operator must stare at driving direction to ensure legible sight for the road condition ahead. In case
that cargo carried interrupts the sight, reverse the vehicle. If it doesn’t work in this way, there must be
another person walking ahead of truck to give guidance and warning.
8. Operation protection
Hands and feet shall be kept far away from moving parts, such as parts connecting the truck body and
fork arms as well as wheels.
9. Loose or unstable stacking of goods or overloaded cargoes prohibited
Loose or unstable stacking of goods will cause falling of goods, or even turnover.
10. Speed
Adjust the speed according to the road conditions, the line of sight and operation safety. Avoid fast
acceleration, braking and turning, which will cause turnover or falling of goods.
11. Signaling
Use the signal horn to give the warning signal when make a turning.
T12 Series Electric Stackers
Safe operating rules