User Manual
Button 4 - Calibration
: This command
changes the calibration used to calculate
the flux of CO
2
. This option is included to
facilitate recalibration during membrane
replacement and to correct for CO
2
sensor
drift. This command
should not be used
without consulting Eosense. Setting the
calibration parameters incorrectly will result
in flux measurement errors.
Figure 23
The Calibration Settings window
Button 5 - Clear Data
: This command erases all
stored data from the eosFD while leaving the time,
frequency and calibration settings unchanged. The
user must confirm the deletion of stored data by
clicking
Delete
in the popup window. As the eosFD
has enough memory to store over seven months of
data at the highest frequency (every five minutes), this
should
rarely
be
required.
Clearing the data
periodically allows for quicker file transfers on
subsequent uses. This process will take 5-10 minutes.
Figure 24
The confirmation window for clearing
store data
6.3.1 Status Bar
The status bar found at the bottom of the
eosLink-FD
program
window
is
used
to
communicate status updates to the user. While
the majority of important notifications will come in
the
form of popup windows, the status bar is
used to update the user regarding connection
status, as well as the serial number and storage
capacity of the connected eosFD. When working
with multiple eosFD’s, ensure that the displayed
serial number matches the connected unit, to
avoid issues with incorrectly named data files.
Figure 25
eosLink-FD main window, showing Status Bar
23
m
© Eosense Inc.
